# Parametric and non-parametric statistics on event-related fields

## Introduction

The goal of this tutorial is to provide a gentle introduction into the different options that are implemented for statistical analysis. Here we will use event-related fields (ERFs), because they are more familiar to most of the audience and easier to visualize. We will show how to do basic statistical testing using the MATLAB statistics toolbox and compare the results with that from using the FieldTrip **ft_timelockstatistics** function. Topics that will be covered are parametric statistics on a single channel and time-window, the multiple comparison problem (MCP), non-parametric randomization testing and cluster-based testing.

This tutorial uses the same MEG language dataset as some of the other tutorials where analyses were done on the single subject level. However, here we will deal with (statistical) analyses on the group level. We will look at how to test statistical differences among conditions in a within-subjects design. The ERF dataset in this tutorial contains data from all 10 subjects that participated in the experiment. The ERF data was obtained using **ft_timelockanalysis**. For the purpose of inspecting your data visually, we also use **ft_timelockgrandaverage** to calculate the grand average across participants, which can be used for subsequent visualization.

You can download the averaged dataset for each subject from our Fieldtrip ftp server.

The tutorial assumes that the preprocessing and timelock-analysis steps are already clear for the reader. If this is not the case, you can read about those steps in other tutorials.

Note that in this tutorial we will not provide detailed information about statistics on channel-level power spectra, time-frequency representations of power (as obtained from freqanalysis), nor on source-level statistics. However, FieldTrip does have similar statistical options for frequency data: at the sensor-level we have the **ft_freqstatistics** function, and on the source-level (statistics on source reconstructed activity), we have the **ft_sourcestatistics** function, the latter works on data obtained from **ft_sourceanalysis**).

A more thorough explanation of randomization tests and cluster-based statistics can be found in the Cluster-based permutation tests on event related fields and the Cluster-based permutation tests on time-frequency data tutorials.

## Background

The topic of this tutorial is the statistical analysis of MEG and EEG data. In experiments, the data is usually collected in different experimental conditions, and the experimenter wants to know, by means of statistical testing, whether there is a difference in the data observed in these conditions. In statistics, a result (for example, a difference among conditions) is statistically significant if it is unlikely to have occurred by chance according to a predetermined threshold probability, the significance level.

An important feature of the MEG and EEG data is that it has a spatial temporal structure, i.e. the data is sampled at multiple time-points and sensors. The nature of the data influences which kind of statistics is the most suitable for comparing conditions. If the experimenter is interested in a difference in the signal at a certain time-point and sensor, then the more widely used parametric tests are also sufficient. If it is not possible to predict where the differences are, then many statistical comparisons are necessary which lead to the *multiple comparisons problem* (MCP). The MCP arises from the fact that the effect of interest (i.e., a difference between experimental conditions) is evaluated at an extremely large number of (channel,time)-pairs. This number is usually in the order of several thousands. Now, the MCP involves that, due to the large number of statistical comparisons (one per (channel,time)-pair), it is not possible to control the so called *family-wise error rate* (FWER) by means of the standard statistical procedures that operate at the level of single (channel,time)-pairs. The FWER is the probability, under the hypothesis of no effect, of falsely concluding that there is a difference between the experimental conditions at one or more (channel,time)-pairs. A solution of the MCP requires a procedure that controls the FWER at some critical alpha-level (typically, 0.05 or 0.01). The FWER is also called the *false alarm rate*.

When parametric statistics are used, one method that addresses this problem is the so-called Bonferroni correction. The idea is if the experimenter is conducting *n* number of statistical tests then each of the individual tests should be tested under a significance level that is divided by *n*. The Bonferroni correction was derived from the observation that if *n* tests are performed with an *alpha* significance level then the probability that one comes out significantly is =< *n***alpha* (Boole's inequality). In order to keep this probability lower, we can use an *alpha* that is divided by *n* for each test. However, the correction comes at the cost of increasing the probability of false negatives, i.e. the test does not have enough power to reveal differences among conditions.

In contrast to the familiar parametric statistical framework, it is straightforward to solve the MCP in the nonparametric framework. Nonparametric tests offer more freedom to the experimenter regarding which test statistics are used for comparing conditions, and help to maximize the sensitivity to the expected effect. For more details see the publication by Maris and Oostenveld (2007) and the Cluster-based permutation tests on event related fields and the Cluster-based permutation tests on time-frequency data tutorials.

## Procedure

To do parametric or non-parametric statistics on event-related fields in a within-subject design we will use a dataset of 10 subjects that has been preprocessed, the planar gradient and the subject-averages of two conditions have been computed. The gray boxes of Figure 1 show those steps that have been done already. The orange boxes within the gray boxes represent processing steps that are done on all trials that belong to one subject in one condition. These steps are described in the Trigger-based trial selection and in the Event related averaging and planar gradient tutorial. How to use the **ft_timelockgrandaverage** and **ft_timelockstatistics** function will be described in this tutorial.

We will perform the following steps to do a statistical test in FieldTrip:

- We can visually inspect the data and look where are differences between the conditions by plotting the grand-averages and subject-averages using the
**ft_multiplotER**, the**ft_singleplotER**and the MATLAB plot functions. This step is optional for this tutorial, but in general it is of course good practice to have a feel of what is going on in your data before you decide to do a statistical test. - To do any kind of statistical testing (parametric or non-parametric, with or without multiple comparison correction) we will use the
**ft_timelockstatistics**function - We can plot a schematic head with the channels of the significant effect with the
**ft_topoplotER**function or optionally with the**ft_clusterplot**function (in case cluster-based non-parametric statistics was used)

*Figure 1. Pipeline of statistical testing. All analysis steps in the gray boxes have been done already.
*

## Reading-in preprocessed and time-locked data in planar gradient format, and grand averaged data

We now describe how we can statistically test the difference between the event-related averages for fully incongruent (FIC) and the fully congruent (FC) sentence endings. For this analysis we use planar gradient data. For convenience we will not do the reading-in and preprocessing steps on all subjects. Instead we begin by loading the timelock structures containing the event-related averages (of the planar gradient data) of all ten subjects. You can download the subject averages. We will also make use of the function ft_timelockgrandaverage to calculate the grand average (average across subjects) and plot it to visually inspect the data

load ERF_orig; % averages for each individual subject, for each condition

ERF_orig contains allsubjFIC and allsubjFC, each storing the event-related averages for the fully incongruent, and the fully congruent sentence endings, respectively.

The format for these variables, are a prime example of how you should organise your data to be suitable for ft_XXXstatistics. Specifically, each variable is a cell array of structures, with each subject's averaged stored in one cell. To create this data structure two steps are required. First, the single-subject averages were calculated individually for each subject using the function ft_timelockanalysis. Second, using a for-loop we have combined the data from each subject, within each condition, into one variable (allsubj_FIC/allsubj_FC). We suggest that you adopt this procedure as well.

On a technical note, it is preferred to represent the multi-subject data as a cell-array of structures, rather than a so-called struct-array. The reason for this is that the cell-array representation allows for easy expansion into a MATLAB function that allows for a variable number of input arguments (which is how the ft_XXXstatistics functions have been designed).

## Parametric statistics

### A single comparison (t-test)

#### Plotting the grand-average and the subject-averages

As you might be familiar with, it is always a good idea to visually inspect your data prior to applying any statistical analyses. Below we show a couple ways of plotting data: the grand average (averaged across all subjects) for all sensors and one specific sensor, as well as plotting the individual average for multiple subjects next to each other.

To begin with we will compute the grand average data using ft_timelockgrandaverage

% load individual subject data load('ERF_orig'); % calculate grand average for each condition cfg = []; cfg.channel = 'all'; cfg.latency = 'all'; cfg.parameter = 'avg'; GA_FC = ft_timelockgrandaverage(cfg,allsubjFC{:}); GA_FIC = ft_timelockgrandaverage(cfg,allsubjFIC{:}); % "{:}" means to use data from all elements of the variable

Now plot all channels with **ft_multiplotER**, and channel MLT12 with **ft_singleplotER** using the grand average data.

cfg = []; cfg.showlabels = 'yes'; cfg.layout = 'CTF151_helmet.mat'; figure; ft_multiplotER(cfg,GA_FC, GA_FIC) cfg = []; cfg.channel = 'MLT12'; figure; ft_singleplotER(cfg,GA_FC, GA_FIC)

From the grand average plot we can zoom in on our comparison of interest and only plot the ERF of channel MLT12 for all subjects, using the individual subject averages data.

time = [0.3 0.7]; % Scaling of the vertical axis for the plots below ymax = 1.9e-13; figure; for isub = 1:10 subplot(3,4,isub) % use the rectangle to indicate the time range used later rectangle('Position',[time(1) 0 (time(2)-time(1)) ymax],'FaceColor',[0.7 0.7 0.7]); hold on; % plot the lines in front of the rectangle plot(allsubjFC{isub}.time,allsubjFC{isub}.avg(52,:)); plot(allsubjFIC{isub}.time,allsubjFIC{isub}.avg(52,:),'r'); title(strcat('subject ',num2str(isub))) ylim([0 1.9e-13]) xlim([-1 2]) end subplot(3,4,11); text(0.5,0.5,'FC','color','b') ;text(0.5,0.3,'FIC','color','r') axis off

From the individual plots and grand average plots above, it seems that between 300ms and 700ms there is a difference between the two conditions in channel MLT12 (channel 52).

We can also plot the differences between conditions, for each subject, in a different manner to further highlight the difference between conditions, using the code below:

chan = 52; time = [0.3 0.7]; % find the time points for the effect of interest in the grand average data timesel_FIC = find(GA_FIC.time >= time(1) & GA_FIC.time <= time(2)); timesel_FC = find(GA_FC.time >= time(1) & GA_FC.time <= time(2)); % select the individual subject data from the time points and calculate the mean for isub = 1:10 values_FIC(isub) = mean(allsubjFIC{isub}.avg(chan,timesel_FIC)); values_FC(isub) = mean(allsubjFC{isub}.avg(chan,timesel_FC)); end % plot to see the effect in each subject M = [values_FC',values_FIC']; figure; plot(M','o-'); xlim([0.5 2.5]) legend({'subj1', 'subj2', 'subj3', 'subj4', 'subj5', 'subj6', ... 'subj7', 'subj8', 'subj9', 'subj10'}, 'location','EastOutside');

#### T-test with MATLAB function

You can do a dependent samples t-test with the MATLAB ttest.m function (in the Statistics toolbox) where you average over this time window for each condition, and compare the average between conditions. From the output, we look at the output variable 'stats' and see that the effect on the selected time and channel is significant with a t-value of -4.9999 and a p-value of 0.00073905.

%dependent samples ttest FCminFIC = values_FC - values_FIC; [h,p,ci,stats] = ttest(FCminFIC, 0, 0.05) % H0: mean = 0, alpha 0.05

#### T-test with FieldTrip function

You can do the same thing in FieldTrip (which does not require the statistics toolbox) using the **ft_timelockstatistics** function. This gives you the same p-value of 0.00073905

% define the parameters for the statistical comparison cfg = []; cfg.channel = 'MLT12'; cfg.latency = [0.3 0.7]; cfg.avgovertime = 'yes'; cfg.parameter = 'avg'; cfg.method = 'analytic'; cfg.statistic = 'ft_statfun_depsamplesT'; cfg.alpha = 0.05; cfg.correctm = 'no'; Nsub = 10; cfg.design(1,1:2*Nsub) = [ones(1,Nsub) 2*ones(1,Nsub)]; cfg.design(2,1:2*Nsub) = [1:Nsub 1:Nsub]; cfg.ivar = 1; % the 1st row in cfg.design contains the independent variable cfg.uvar = 2; % the 2nd row in cfg.design contains the subject number stat = ft_timelockstatistics(cfg,allsubjFC{:},allsubjFIC{:}); % don't forget the {:}!

From the code above you can see that the statistical comparison is between conditions (FC and FIC), and that in order to do this you must provide the individual timelocked dataset, from each subject, into the statistics function.

#### Exercise 1

**ft_timelockstatistics**. You can plot the t-value versus time, the probability versus time and the statistical mask versus time. Note that the output of the

**ft_timelockstatistics**function closely resembles the output of the

**ft_timelockanalysis**function.

### Multiple comparisons

In the previous paragraph we picked a channel and time window by hand after eyeballing the effect. If you would like to test the significance of the effect in all channels you could make a loop over channels.

%loop over channels time = [0.3 0.7]; timesel_FIC = find(GA_FIC.time >= time(1) & GA_FIC.time <= time(2)); timesel_FC = find(GA_FC.time >= time(1) & GA_FC.time <= time(2)); clear h p FICminFC = zeros(1,10); for iChan = 1:151 for isub = 1:10 FICminFC(isub) = ... mean(allsubjFIC{isub}.avg(iChan,timesel_FIC)) - ... mean(allsubjFC{isub}.avg(iChan,timesel_FC)); end [h(iChan), p(iChan)] = ttest(FICminFC, 0, 0.05 ); % test each channel separately end % plot uncorrected "significant" channels cfg = []; cfg.style = 'blank'; cfg.layout = 'CTF151_helmet.mat'; cfg.highlight = 'on'; cfg.highlightchannel = find(h); cfg.comment = 'no'; figure; ft_topoplotER(cfg, GA_FC) title('significant without multiple comparison correction')

However, since now you are performing 151 individual tests, you can no longer control the false alarm rate. Given the null-hypothesis and an alpha of 5%, you have a 5% chance of making a false alarm and incorrectly concluding that the null-hypothesis should be rejected. As this false alarm rate applies to each test that you perform, the chance of making a false alarm for 151 tests in parallel is much larger than the desired 5%. This is the multiple comparison problem.

To ensure that the false alarm rate is controlled at the desired alpha level over all channels, you should do a correction for multiple comparisons. The best known correction is the Bonferroni correction, which controls the false alarm rate for multiple independent tests. To do this, divide your initial alpha level (i.e. the desired upper boundary for the false alarm rate) by the number of tests that you perform. In this case with 151 channels the alpha level would become 0.05/151 which is 0.00033113. With this alpha value the effect is no longer significant on any channel. In some cases, as in this one, a Bonferroni correction is then too conservative because the effect on one MEG channel is highly correlated with neighboring channels (in space, and also in time). In sum, even though the Bonferroni correction achieves the desired control of the type-I error (false alarm rate), the type-II error (chance of not rejecting H0 when in fact it should be rejected) is much larger than desired.

Below you can see the means by which to implement a Bonferroni correction. However, there are other options on FieldTrip to control for multiple comparisons which are less conservative, and hence more sensitive.

#### Bonferroni correction with MATLAB function

% with Bonferroni correction for multiple comparisons FICminFC = zeros(1,10); for iChan = 1:151 for isub = 1:10 FICminFC(isub) = ... mean(allsubjFIC{isub}.avg(iChan,timesel_FIC)) - ... mean(allsubjFC{isub}.avg(iChan,timesel_FC)); end [h(iChan), p(iChan)] = ttest(FICminFC, 0, 0.05/151); % test each channel separately end

#### Bonferroni correction with FieldTrip function

cfg = []; cfg.channel = 'MEG'; %now all channels cfg.latency = [0.3 0.7]; cfg.avgovertime = 'yes'; cfg.parameter = 'avg'; cfg.method = 'analytic'; cfg.statistic = 'ft_statfun_depsamplesT' cfg.alpha = 0.05; cfg.correctm = 'bonferroni'; Nsub = 10; cfg.design(1,1:2*Nsub) = [ones(1,Nsub) 2*ones(1,Nsub)]; cfg.design(2,1:2*Nsub) = [1:Nsub 1:Nsub]; cfg.ivar = 1; % the 1st row in cfg.design contains the independent variable cfg.uvar = 2; % the 2nd row in cfg.design contains the subject number stat = ft_timelockstatistics(cfg,allsubjFC{:},allsubjFIC{:});

Fieldtrip also has other methods implemented for performing a multiple comparison correction, such as FDR. See the statistics_analytic function for the options to cfg.correctm when you want to do a parametric test.

## Non-parametric statistics

### Permutation test based on t statistics

Instead of using the analytic t-distribution to calculate the appropriate p-value for your effect, you can use a nonparametric randomisation test to obtain the p-value.

This is implemented in FieldTrip in the function statistics_montecarlo which is called by **ft_timelockstatistics** when you set cfg.method = 'montecarlo'. A Monte-Carlo estimate of the significance probabilities and/or critical values is calculated based on randomising or permuting your data many times between the conditions.

cfg = []; cfg.channel = 'MEG'; cfg.latency = [0.3 0.7]; cfg.avgovertime = 'yes'; cfg.parameter = 'avg'; cfg.method = 'montecarlo'; cfg.statistic = 'ft_statfun_depsamplesT' cfg.alpha = 0.05; cfg.correctm = 'no'; cfg.correcttail = 'prob'; cfg.numrandomization = 1000; Nsub = 10; cfg.design(1,1:2*Nsub) = [ones(1,Nsub) 2*ones(1,Nsub)]; cfg.design(2,1:2*Nsub) = [1:Nsub 1:Nsub]; cfg.ivar = 1; % the 1st row in cfg.design contains the independent variable cfg.uvar = 2; % the 2nd row in cfg.design contains the subject number stat = ft_timelockstatistics(cfg,allsubjFIC{:},allsubjFC{:}) % make the plot cfg = []; cfg.style = 'blank'; cfg.layout = 'CTF151_helmet.mat'; cfg.highlight = 'on'; cfg.highlightchannel = find(stat.mask); cfg.comment = 'no'; figure; ft_topoplotER(cfg, GA_FC) title('Nonparametric: significant without multiple comparison correction')

With the method (cfg.method) of statistical test set as a permutation-based test (montecarlo) the following sensors show a significant effect (p<0.05) between 0.3 and 0.7 s.

Compare this plot with the earlier one using parametric statistics with the uncorrected p-values.

Also in the non-parametric approach for testing of statistical significance different corrections for multiple comparisons such as Bonferroni, fdr, and others are implemented. See the options for cfg.correctm in statistics_montecarlo.

### Permutation test based on cluster statistics

FieldTrip also implements a special way to correct for multiple comparisons, which makes use of the feature in the data that the effects at neighbouring timepoints and sensors are highly correlated. For more details see the cluster permutation tutorials for ERFs and time frequency data and the publication by Maris and Oostenveld (2007).

This method requires you to define neighbouring sensors. FieldTrip has a function that can do that for you called ft_prepare_neighbours. The following example will construct a neighbourhood structure and show which channels are defined as neighbours:

cfg = []; cfg.method = 'template'; % try 'distance' as well cfg.template = 'ctf151_neighb.mat'; % specify type of template cfg.layout = 'CTF151_helmet.mat'; % specify layout of sensors* cfg.feedback = 'yes'; % show a neighbour plot neighbours = ft_prepare_neighbours(cfg, GA_FC); % define neighbouring channels %*note that the layout and template fields have to be entered because at the earlier stage when ft_timelockgrandaverage is called the field 'grad' is removed. It is this field that holds information about the (layout of the) sensors.

cfg = []; cfg.channel = 'MEG'; cfg.neighbours = neighbours; % defined as above cfg.latency = [0.3 0.7]; cfg.avgovertime = 'yes'; cfg.parameter = 'avg'; cfg.method = 'montecarlo'; cfg.statistic = 'ft_statfun_depsamplesT'; cfg.alpha = 0.05; cfg.correctm = 'cluster'; cfg.correcttail = 'prob'; cfg.numrandomization = 1000; Nsub = 10; cfg.design(1,1:2*Nsub) = [ones(1,Nsub) 2*ones(1,Nsub)]; cfg.design(2,1:2*Nsub) = [1:Nsub 1:Nsub]; cfg.ivar = 1; % the 1st row in cfg.design contains the independent variable cfg.uvar = 2; % the 2nd row in cfg.design contains the subject number stat = ft_timelockstatistics(cfg,allsubjFIC{:},allsubjFC{:}); % make a plot cfg = []; cfg.style = 'blank'; cfg.layout = 'CTF151_helmet.mat'; cfg.highlight = 'on'; cfg.highlightchannel = find(stat.mask); cfg.comment = 'no'; figure; ft_topoplotER(cfg, GA_FC) title('Nonparametric: significant with cluster multiple comparison correction')

With the cluster-based permutation method for multiple comparisons the following sensors show a significant effect (p<0.05) between 0.3 and 0.5 s.

So far we predefined a time window over which the effect was averaged, and tested the difference of that between conditions. You can also chose to not average over the predefine time window, and instead cluster simultaneously over neighboring channels and neighboring time points within your time window of interest . From the example below, we now find a channel-time cluster is found from 0.33 s until 0.52 s in which p < 0.05.

cfg = []; cfg.channel = 'MEG'; cfg.neighbours = neighbours; % defined as above cfg.latency = [-0.25 1]; cfg.avgovertime = 'no'; cfg.parameter = 'avg'; cfg.method = 'montecarlo'; cfg.statistic = 'ft_statfun_depsamplesT'; cfg.alpha = 0.05; cfg.correctm = 'cluster'; cfg.correcttail = 'prob'; cfg.numrandomization = 1000; cfg.minnbchan = 2; % minimal neighbouring channels Nsub = 10; cfg.design(1,1:2*Nsub) = [ones(1,Nsub) 2*ones(1,Nsub)]; cfg.design(2,1:2*Nsub) = [1:Nsub 1:Nsub]; cfg.ivar = 1; % the 1st row in cfg.design contains the independent variable cfg.uvar = 2; % the 2nd row in cfg.design contains the subject number stat = ft_timelockstatistics(cfg,allsubjFIC{:},allsubjFC{:});

**ft_clusterplot** can be used to plot the effect.

% make a plot cfg = []; cfg.highlightsymbolseries = ['*','*','.','.','.']; cfg.layout = 'CTF151_helmet.mat'; cfg.contournum = 0; cfg.markersymbol = '.'; cfg.alpha = 0.05; cfg.parameter='stat'; cfg.zlim = [-5 5]; ft_clusterplot(cfg,stat);

And be sure to cite the relevant papers (Robert Oostenveld's FieldTrip paper and the Eric Maris' cluster-based permutation paper) in your methods section!

## Summary and suggested further reading

This tutorial showed you how to perform parametric and non-parametric statistics in FieldTrip, as well as the the equivalent t-test and Bonferroni correction with MATLAB functions. Furthermore, it demonstrated how to plot the sensors that show a significant effect.

After this gentle introduction in statistics with FieldTrip, you can continue with the Cluster-based permutation tests on event related fields and the cluster-based permutation tests on time-frequency data tutorials. These give a more detailed description of non-parametric statistical testing with a cluster-based approach.

If you would like to read more about issues related to statistical analysis, you can read the following FAQ's as well:

If you would like to read about neighborhood selection, you can read the following FAQ's:

Or you can look also at the following example scripts:

This tutorial was last tested with version 20120612 of FieldTrip by Jan-Mathijs using MATLAB 2011b on MacOS 64-bit