# Statistical analysis and multiple comparison correction for combined MEG/EEG data

## Introduction

The objective of this tutorial is to give an introduction to the statistical analysis of MEG data using different methods to control for the false alarm rate. The tutorial starts with sketching the background of cluster-based permutation tests. Subsequently it is shown how to use FieldTrip to perform statistical analysis (including cluster-based permutation tests) on the time-frequency response to a movement, and to the auditory mismatch negativity. The tutorial makes use of a between-trials (within-subject) design.

In this tutorial we will continue working on the dataset described in the Preprocessing and event-related activity and the Time-frequency analysis of MEG and EEG tutorials. We will repeat some code here to select the trials and preprocess the data. We assume that the preprocessingand the computation of the ERFs/TFRs are already clear to the reader.

This tutorial is not covering group analysis. If you are interested in that, you can read the other tutorials that cover cluster-based permutation tests on event related fields and on time-frequency data. If you are interested in a more gentle introduction as to how parametric statistical tests can be used with FieldTrip, you can read the Parametric and non-parametric statistics on event-related fields tutorial.

## Background

The topic of this tutorial is the statistical analysis of multi-channel MEG data. In cognitive experiments, the data is usually collected in different experimental conditions, and the experimenter wants to know whether there is a difference in the data observed in these conditions. In statistics, a result (for example, a difference among conditions) is statistically significant if it is unlikely to have occurred by chance according to a predetermined threshold probability, the significance level.

An important feature of the MEG and EEG data is that it has a spatial temporal structure, i.e. the data is sampled at multiple time-points and sensors. The nature of the data influences which kind of statistics is the most suitable for comparing conditions. If the experimenter is interested in a difference in the signal at a certain time-point and sensor, then the more widely used parametric tests are also sufficient. If it is not possible to predict where the differences are, then many statistical comparisons are necessary which lead to the *multiple comparisons problem* (MCP). The MCP arises from the fact that the effect of interest (i.e., a difference between experimental conditions) is evaluated at an extremely large number of (channel,time)-pairs. This number is usually in the order of several thousands. Now, the MCP involves that, due to the large number of statistical comparisons (one per (channel,time)-pair), it is not possible to control the so called *family-wise error rate* (FWER) by means of the standard statistical procedures that operate at the level of single (channel,time)-pairs. The FWER is the probability, under the hypothesis of no effect, of falsely concluding that there is a difference between the experimental conditions at one or more (channel,time)-pairs. A solution of the MCP requires a procedure that controls the FWER at some critical alpha-level (typically, 0.05 or 0.01). The FWER is also called the *false alarm rate*.

When parametric statistics are used, one method that addresses this problem is the so-called Bonferroni correction. The idea is if the experimenter is conducting *n* number of statistical tests then each of the individual tests should be tested under a significance level that is divided by *n*. The Bonferroni correction was derived from the observation that if *n* tests are performed with an *alpha* significance level then the probability that one comes out significantly is =< *n***alpha* (Boole's inequality). In order to keep this probability lower, we can use an *alpha* that is divided by *n* for each test. However, the correction comes at the cost of increasing the probability of false negatives, i.e. the test does not have enough power to reveal differences among conditions.

In constrast to the familiar parametric statistical framework, it is straightforward to solve the MCP in the nonparametric framework. Nonparametric tests offer more freedom to the experimenter regarding which test statistics are used for comparing conditions, and help to maximize the sensitivity to the expected effect. For more details see the publication by Maris and Oostenveld (2007).

## Procedure

The preprocessing and time-frequency computation is similar to how it is done in the previous tutorials, and hence not explained in further detail.

The MEG dataset that we use in this tutorial is available as oddball1_mc_downsampled.fif from our ftp server. Furthermore, you should download and save the custom trial function trialfun_oddball_responselocked.m to a directory that is on your MATLAB path.

### Preprocessing the response-locked data

cfg = []; cfg.dataset = 'oddball1_mc_downsampled.fif';

% define trials based on response cfg.trialdef.prestim = 1.0; cfg.trialdef.poststim = 2.0; cfg.trialdef.stim_triggers = [1 2]; cfg.trialdef.rsp_triggers = [256 4096]; cfg.trialfun = 'trialfun_oddball_responselocked'; cfg = ft_definetrial(cfg);

% preprocess MEG data cfg.channel = 'MEG*1'; cfg.continuous = 'yes'; cfg.demean = 'yes'; cfg.dftfilter = 'yes'; cfg.dftfreq = [50 100];

data_responselocked = ft_preprocessing(cfg);

### Averaged time-frequency responses

cfg = []; cfg.output = 'pow'; cfg.method = 'mtmconvol'; cfg.taper = 'hanning'; cfg.toi = 0.0 : 0.1 : 1.0; cfg.foi = 12:24; cfg.t_ftimwin = ones(size(cfg.foi)) * 0.5; cfg.trials = find(data_responselocked.trialinfo(:,1) == 256); TFR_left = ft_freqanalysis(cfg, data_responselocked); cfg.trials = find(data_responselocked.trialinfo(:,1) == 4096); TFR_right = ft_freqanalysis(cfg, data_responselocked);

cfg = []; cfg.baseline = [0 0]; cfg.baselinetype = 'absolute'; cfg.layout = 'neuromag306mag.lay'; figure; ft_multiplotTFR(cfg, TFR_left); figure; ft_multiplotTFR(cfg, TFR_right);

### Compute contrast between response hands

cfg = []; cfg.parameter = 'powspctrm'; cfg.operation = '(x1-x2)/(x1+x2)'; TFR_diff = ft_math(cfg, TFR_right, TFR_left); cfg = []; cfg.marker = 'on'; cfg.layout = 'neuromag306mag.lay'; cfg.channel = 'MEG*1'; figure; ft_multiplotTFR(cfg, TFR_diff);

### Single-trial time-frequency responses

To perform the statistical test we need to compute single-trial time-frequency responses. This is done using the cfg.keeptrials configuratino option, which by default is ‘no’. Since we compute the TFR for each individual trial, we don’t have to split the data in the two conditions. The condition to which each trial belongs is kept with the data in teh *trialinfo* field.

cfg = []; cfg.output = 'pow'; cfg.method = 'mtmconvol'; cfg.taper = 'hanning'; cfg.toi = 0.0 : 0.1 : 1.0; cfg.foi = 15:25; cfg.t_ftimwin = ones(size(cfg.foi)) * 0.5; cfg.keeptrials = 'yes'; % keep the TFR on individual trials TFR_all = ft_freqanalysis(cfg, data_responselocked);

Let us compare the single-trial TFR with the averaged TFR.

disp(TFR_all) label: {102x1 cell} dimord: 'rpt_chan_freq_time' freq: [14.9800 15.9787 16.9774 17.9760 18.9747 19.9734 20.9720 21.9707 22.9694 23.9680 24.9667] time: [0 0.1000 0.2000 0.3000 0.4000 0.5000 0.6000 0.7000 0.8000 0.9000 1.0000] powspctrm: [4-D double] cumtapcnt: [100x11 double] elec: [1x1 struct] grad: [1x1 struct] trialinfo: [100x2 double] cfg: [1x1 struct]

disp(TFR_left) label: {102x1 cell} dimord: 'chan_freq_time' freq: [11.9840 12.9827 13.9814 14.9800 15.9787 16.9774 17.9760 18.9747 19.9734 20.9720 21.9707 22.9694 23.9680] time: [0 0.1000 0.2000 0.3000 0.4000 0.5000 0.6000 0.7000 0.8000 0.9000 1.0000] powspctrm: [102x13x11 double] elec: [1x1 struct] grad: [1x1 struct] cfg: [1x1 struct]

Hint: you can make a selection of the data like

TFR_all.powspctrm(:, 15, 4, 8)

to give you a vector with the power values in each trial, and you can use the *trialinfo* as the grouping variable.

### Log-transform the single-trial power

Spectral power is not normally distributed. Although this is in theory not a problem for the non-parametric statistical test, its sensitivity is usually increased by log-transforming the values in the power spectrum.

cfg = []; cfg.parameter = 'powspctrm'; cfg.operation = 'log10'; TFR_logpow = ft_math(cfg, TFR_all);

### Compute the neighbours

With time-frequency data we have three dimensions in which we can form clusters. In the time and frequency dimension it is trivial how to form the clusters, but the spatial dimension is not regularly represented in the data. Hence we have to construct an explicit description of the neighbourhood of each channel

cfg = []; cfg.channel = 'MEG*1'; cfg.method = 'triangulation'; cfg.grad = TFR_all.grad; cfg.feedback = 'yes'; neighbours = ft_prepare_neighbours(cfg);

disp(neighbours(1)) label: 'MEG0111' neighblabel: {3x1 cell}

The neighbourhood structure contains for each channel a list of other channels that are considered its neighbours. In case you do **not** want to cluster over channels, you can specify the neighbours as *[]*, i.e. empty.

### Compute the statistics

cfg = []; cfg.channel = 'MEG*1'; cfg.statistic = 'indepsamplesT'; cfg.ivar = 1; cfg.design = zeros(1, size(TFR_all.trialinfo,1)); cfg.design(TFR_all.trialinfo(:,1)== 256) = 1; cfg.design(TFR_all.trialinfo(:,1)==4096) = 2; cfg.method = 'analytic'; cfg.correctm = 'no'; TFR_stat1 = ft_freqstatistics(cfg, TFR_logpow);

The result of **ft_freqstatistics** is a structure that is organized just like most other FieldTrip structures, i.e. it has a *dimord* field which explains how the data contained in the structure can be interpreted. This also means that the statistical output can be visualized like any other FieldTrip structure, in this case with **ft_multiplotTFR**, **singleplotTFR** or **ft_topoplotTFR**.

disp(TFR_stat1) df: 98 critval: [-1.9845 1.9845] stat: [102x11x11 double] prob: [102x11x11 double] mask: [102x11x11 logical] dimord: 'chan_freq_time' label: {102x1 cell} freq: [14.9800 15.9787 16.9774 17.9760 18.9747 19.9734 20.9720 21.9707 22.9694 23.9680 24.9667] time: [0 0.1000 0.2000 0.3000 0.4000 0.5000 0.6000 0.7000 0.8000 0.9000 1.0000] cfg: [1x1 struct]

Having computed the probability without correcting for multiple comparisons, we proceed with three methods that do correct for the MCP.

cfg.method = 'analytic'; cfg.correctm = 'bonferoni'; TFR_stat2 = ft_freqstatistics(cfg, TFR_logpow);

cfg.method = 'analytic'; cfg.correctm = 'fdr'; TFR_stat3 = ft_freqstatistics(cfg, TFR_logpow);

cfg.method = 'montecarlo'; cfg.correctm = 'cluster'; cfg.numrandomization = 500; % 1000 is recommended, but takes longer cfg.neighbours = neighbours; TFR_stat4 = ft_freqstatistics(cfg, TFR_logpow);

### Visualise the results

We can visualize the results just like any other TFR structure. The *TFR_stat* structures contain the actual statistical value that was computed (i.e. the t-value) in the *stat* field.

cfg = []; cfg.marker = 'on'; cfg.layout = 'neuromag306mag.lay'; cfg.channel = 'MEG*1'; cfg.parameter = 'stat'; % plot the t-value cfg.maskparameter = 'mask'; % use the thresholded probability to mask the data cfg.maskstyle = 'saturation';

figure; ft_multiplotTFR(cfg, TFR_stat1); figure; ft_multiplotTFR(cfg, TFR_stat2); figure; ft_multiplotTFR(cfg, TFR_stat3); figure; ft_multiplotTFR(cfg, TFR_stat4);

### Preprocessing the stimulus-locked data

Let us now move on with the stimulus-locked activity, i.e. the auditory event-related fields. The preprocessing is again similar to the previous tutorials.

The following requires that the custom trial function trialfun_oddball_stimlocked.m is present in a directory that is on your MATLAB path.

cfg = []; cfg.dataset = 'oddball1_mc_downsampled.fif';

% define trials based on stimulus cfg.trialdef.prestim = 0.3; cfg.trialdef.poststim = 0.7; cfg.trialdef.stim_triggers = [1 2]; cfg.trialdef.rsp_triggers = [256 4096]; cfg.trialfun = 'trialfun_oddball_stimlocked'; cfg = ft_definetrial(cfg);

% preprocess MEG data cfg.channel = 'MEG*1'; cfg.continuous = 'yes'; cfg.demean = 'yes'; cfg.baselinewindow = [-inf 0]; cfg.dftfilter = 'yes'; cfg.dftfreq = [50 100];

data_stimlocked = ft_preprocessing(cfg);

The oddball effect is rather strong, and with 600 trials (500 standards and 100 oddballs) it would be trivial to find a significant effect. To make the procedure slightly more interesting and informative, we will make a subselection by taking the first 100 trials.

cfg = []; cfg.trials = 1:100; data_stimlocked = ft_selectdata(cfg, data_stimlocked);

After this subselection, there are 84 standard trials and only 16 deviant trials remaining.

We can compute the ERFs for the two experimental conditions by selecting the standard (1) and deviant (2) trigger codes in the *trialinfo* field.

cfg = []; cfg.trials = find(data_stimlocked.trialinfo(:,1) == 1); ERF_std = ft_timelockanalysis(cfg, data_stimlocked); cfg.trials = find(data_stimlocked.trialinfo(:,1) == 2); ERF_dev = ft_timelockanalysis(cfg, data_stimlocked);

**ft_selectdata**function is a very handy general purpose function that allows making selections in any dimension of the data. Furthermore, it allows you to compute averages over any of the dimensions. In case you would need the ERF topography as a vector that is averaged over 80 to 110 ms, you could do

cfg = []; cfg.latency = [0.08 0.11]; cfg.avgovertime = 'yes'; ERF_peak = ft_selectdata(cfg, ERF_std)

cfg = []; cfg.layout = 'neuromag306mag.lay'; figure; ft_multiplotER(cfg, ERF_std, ERF_dev);

To assess whether there is a significant difference between the two conditions, we also need to know what the variance in the data is. In principle we could use the variance that is estimated by **ft_timelockanalysis** and manualy compute the t-test.

disp(ERF_std) avg: [102x251 double] var: [102x251 double] time: [1x251 double] dof: [102x251 double] label: {102x1 cell} dimord: 'chan_time' grad: [1x1 struct] elec: [1x1 struct] cfg: [1x1 struct]

However, we will leave the statistical evaluation to the **ft_timelockstatistics** function, which expects single-trial input in the case of a within-subject test. The **ft_timelockanalysis** function has the cfg.keeptrials option, which tells the function to keep the individual trials. This basically amounts to a reorganization of the data, since the single trials are also present in the segmented raw data structure.

cfg = []; cfg.keeptrials = 'yes'; ERF_all = ft_timelockanalysis(cfg, data_stimlocked);

disp(ERF_all) avg: [102x251 double] var: [102x251 double] time: [1x251 double] dof: [102x251 double] label: {102x1 cell} trial: [100x102x251 double] dimord: 'rpt_chan_time' grad: [1x1 struct] elec: [1x1 struct] trialinfo: [100x3 double] cfg: [1x1 struct]

Note that the dimord is *rpt_chan_time*, i.e. trials by channels by time, which matches with the size of the ERF_all.trial array.

We proceed by computing the statistical tets, which returns the t-value, the probability and a binary mask that contains a 0 for all data points where the probability is below the a-prior threshold, and 1 where it is above the threshold. The *cfg.design* field specifies the condition in which each of the trials is observed. For the *indepsamplesT* statistic, it should contain 1’s and 2’s.

cfg = []; cfg.statistic = 'indepsamplesT'; cfg.design = zeros(1, size(ERF_all.trialinfo,1)); cfg.ivar = 1;

cfg.design(ERF_all.trialinfo(:,1)==1) = 1; cfg.design(ERF_all.trialinfo(:,1)==2) = 2;

cfg.method = 'analytic'; cfg.correctm = 'no'; ERF_stat1 = ft_timelockstatistics(cfg, ERF_all);

cfg.method = 'analytic'; cfg.correctm = 'bonferoni'; ERF_stat2 = ft_timelockstatistics(cfg, ERF_all);

cfg.method = 'analytic'; cfg.correctm = 'fdr'; ERF_stat3 = ft_timelockstatistics(cfg, ERF_all);

cfg.method = 'montecarlo'; cfg.correctm = 'cluster'; cfg.numrandomization = 500; % 1000 is recommended, but that takes longer cfg.neighbours = neighbours; ERF_stat4 = ft_timelockstatistics(cfg, ERF_all);

### Visualise the results

Again we can visualize the results of the statistical comparison. Since we have simple ERF data in two conditions, we can plot the original ERFs in combination with the statistical significance. The **ft_multiplotER** function has a number of options for highlighting the data that is significant. These are specified using the cfg.maskstyle parameter.

cfg = []; cfg.layout = 'neuromag306mag.lay'; cfg.maskparameter = 'mask'; cfg.maskstyle = 'box';

ERF_std.mask = ERF_stat1.mask; % copy the significance mask into the ERF figure; ft_multiplotER(cfg, ERF_std, ERF_dev); title('no correction');

ERF_std.mask = ERF_stat2.mask; % copy the significance mask into the ERF figure; ft_multiplotER(cfg, ERF_std, ERF_dev); title('bonferroni');

ERF_std.mask = ERF_stat3.mask; % copy the significance mask into the ERF figure; ft_multiplotER(cfg, ERF_std, ERF_dev); title('fdr');

ERF_std.mask = ERF_stat4.mask; % copy the significance mask into the ERF figure; ft_multiplotER(cfg, ERF_std, ERF_dev); title('cluster');

## Summary and conclusion

This tutorial showed you how to perform parametric and non-parametric statistics in FieldTrip. It addresses multiple ways of dealing with the multiple comparison problem. Furthermore, it demonstrated how to plot the part of the data that show the significant effect.

### Suggested further reading

Tutorials:

2014/05/05 10:39 | ||

2009/04/06 21:15 | Ingrid Nieuwenhuis | |

2009/04/06 21:16 | Ingrid Nieuwenhuis | |

2010/01/19 14:51 | ||

2015/07/15 15:33 | NLam | |

2014/10/02 23:05 | Robert Oostenveld |

FAQs:

2011/07/08 10:58 | Jörn M. Horschig | |

2011/07/08 10:54 | Jörn M. Horschig | |

2015/05/23 10:36 | ||

2015/11/02 20:51 | ||

2011/09/14 09:53 | Robert Oostenveld | |

2015/03/12 12:16 | Jim Herring | |

2011/07/08 10:56 | Jörn M. Horschig | |

2014/12/17 15:58 | Robert Oostenveld | |

2014/02/21 08:25 | ||

2009/12/10 09:28 | ||

2011/06/23 17:36 |

Example scripts:

2009/03/03 21:52 | ||

2017/10/09 09:46 | Robert Oostenveld | |

2009/03/05 16:56 | Saskia Haegens | |

2009/10/13 14:46 | ||

2016/11/11 09:45 | Robert Oostenveld |