# Inverse problem

## Introduction

In this tutorial you can find information about how to fit dipole models and how to do source reconstruction using minimum-norm estimation to the somatosensory evoked potentials (SEPs) of a single subject from the preprocessing. We will be working on the dataset from the previous hands on sessions, and we will use the functional and anatomical data from these tutorials to deal with the inverse problem. As you already noticed we have prepared two different mathematical models from the forward problem. We will use both to solve the inverse problem and compare the results. You've either got the relevant data already processed yourself or can find in the data directory.

This tutorial will not show how to combine source-level data over multiple subjects. It will also not describe how to do source-localization of oscillatory activation. You can check the Localizing oscillatory sources using beamformer techniques tutorial if you are interested in the later.

## Background

### Dipole fit

In this tutorial we will use the dipole fitting approach (1) to localise the neuronal activity and (2) to estimate the time course of the activity. This approach is most suitable for relatively early cortical activity which is not spread over many or large cortical areas. Dipole fitting assumes that a small number of point-like equivalent current dipoles (ECDs) can describe the measured topography. It optimises the location, the orientation and the amplitude of the model dipoles in order to minimise the difference between the model and measured topography. A good introduction to dipole fitting is provided by Scherg (1990) ^{1)}.

### Minimum norm estimate

To calculate distributed neuronal activation we will use the minimum-norm estimation. This approach is favored for analyzing evoked responses and for tracking the wide-spread activation over time. It is a distributed inverse solution that discretizes the source space into locations on the cortical surface or in the brain volume using a large number of equivalent current dipoles. It estimates the amplitude of all modeled source locations simultaneously and recovers a source distribution with minimum overall energy that produces data consistent with the measurement ^{2)} ^{3)}. The reference for the implemented method is Dale et al. (2000).

## Dipole fit

For this tutorial you should have already computed everything need in advance.

load elec load headmodel_fem_eeg_tr load leadfield_fem_eeg load mri_resliced load EEG_avg load MEG_avg load mesh_surf

If you can use duneuro you should already computed this files. If not you can load them here.

load leadfield_fem_meg

### EEG

We start with a grid search. In our case, this should be enough. The resolution of the source model is fine enough so that a further nonlinear fitting is not necessary.

% Dipole fit cfg = []; cfg.numdipoles = 1; %number of expected cfg.headmodel = headmodel_fem_eeg_tr; %the head model cfg.grid = leadfield_fem_eeg; %the precomputed leadfield cfg.nonlinear = 'no'; %only dipole scan cfg.elec = elec; %the electrode model cfg.latency = 0.025; %the latency of interest dipfit_fem_eeg = ft_dipolefitting(cfg,EEG_avg);

A quick look dipfit_bem.dip gives us information about the dipole fit. Especially a low residual variance (rv) shows us that the fitted dipole quite well explains the data.

dipfit_fem_eeg.dip ans = pos: [10 26 90] %dipole position mom: [3x1 double] %dipole moment pot: [74x1 double] %potential at the electrodes rv: 0.027147418310096 %residual variance unit: 'mm'

And we visualize the dipole and see where it was localized in the brain.

%Visualise dipole fit ft_plot_mesh(mesh_surf(3)); alpha 0.7; ft_plot_dipole(dipfit_fem_eeg.dip.pos(1,:), mean(dipfit_fem_eeg.dip.mom(1:3,:),2), 'color', 'b','unit','mm')

*Figure 1. Dipole computed with FEM model for EEG*

### MEG

Now we do a grid search with MEG.

% Dipole fit cfg = []; cfg.numdipoles = 1; %number of expected cfg.headmodel = headmodel_fem_meg_tr; %the head model cfg.grid = leadfield_fem_meg; %the precomputed leadfield cfg.nonlinear = 'no'; %only dipole scan cfg.grad = grad; %the electrode model cfg.latency = 0.025; %the latency of interest dipfit_fem_meg = ft_dipolefitting(cfg,MEG_avg);

Again we look at dipfit_bem.dip to see the information about the reconstructed dipole. The residual variance again is very low.

dipfit_fem_meg.dip ans = pos: [14 52 90] %dipole position mom: [3x1 double] %dipole moment pot: [271x1 double] %potential at the electrodes rv: 0.023526877979900 %residual variance unit: 'mm'

And we visualize the dipole and see where it was localized in the brain.

%Visualise dipole fit ft_plot_mesh(mesh_surf(3)); alpha 0.7; ft_plot_dipole(dipfit_fem_meg.dip.pos(1,:), mean(dipfit_fem_meg.dip.mom(1:3,:),2), 'color', 'r','unit','mm')

*Figure 2. Dipole computed with FEM model for MEG*

### Comparison of EEG and MEG

ft_plot_mesh(mesh_surf(3));alpha 0.7; ft_plot_dipole(dipfit_fem_eeg.dip.pos(1,:), mean(dipfit_fem_eeg.dip.mom(1:3,:),2), 'color', 'b','unit','mm') ft_plot_dipole(dipfit_fem_meg.dip.pos(1,:), mean(dipfit_fem_meg.dip.mom(1:3,:),2), 'color', 'r','unit','mm')

## Minimum norm estimate

#### EEG

We now start with a MNE in EEG.

cfg = []; cfg.method = 'mne'; %specify minimum norm estimate as method cfg.latency = 0.025; %latency of interest cfg.grid = leadfield_fem_eeg; %the precomputed leadfield cfg.headmodel = headmodel_fem_eeg_tr; %the head model cfg.mne.prewhiten = 'yes'; %prewhiten data cfg.mne.lambda = 0.1; %regularisation parameter cfg.mne.scalesourcecov = 'yes'; %scaling the source covariance matrix minimum_norm_eeg = ft_sourceanalysis(cfg,EEG_avg);

For the purpose of visualization, we interpolate the MNE results onto the replaced anatomical MRI.

cfg = []; cfg.parameter = 'avg.pow'; interpolate = ft_sourceinterpolate(cfg, minimum_norm_eeg , mri_resliced);

cfg = []; cfg.method = 'ortho'; cfg.funparameter = 'pow'; ft_sourceplot(cfg,interpolate);

*Figure 3. Minimum norm estimation with FEM model for EEG*

#### MEG

cfg = []; cfg.method = 'mne'; %specify minimum norm estimate as method cfg.latency = 0.025; %latency of interest cfg.grid = leadfield_fem_meg; %the precomputed leadfield cfg.headmodel = headmodel_fem_meg_tr; %the head model cfg.mne.prewhiten = 'yes'; %prewhiten data cfg.mne.lambda = 0.1; %regularisation parameter cfg.mne.scalesourcecov = 'yes'; %scaling the source covariance matrix minimum_norm_meg = ft_sourceanalysis(cfg,MEG_avg);

For the purpose of visualization, we interpolate the MNE results onto the replaced anatomical MRI.

cfg = []; cfg.parameter = 'avg.pow'; interpolate = ft_sourceinterpolate(cfg, minimum_norm_meg , mri_resliced);

cfg = []; cfg.method = 'ortho'; cfg.funparameter = 'pow'; ft_sourceplot(cfg,interpolate);

*Figure 4. Minimum norm estimation with FEM model for MEG*

## Exercises

#### Exercise 1

#### Exercise 2

#### Exercise 3

#### Exercise 4

## Summary and suggested further reading

In this tutorial, we learned how to solve the inverse problem. For this, we used the preprocessed functional data and the forward model. The inverse techniques we used in this tutorial were “Dipole Fit” and “Minimum Norm Estimation”. We used both techniques with the different parameters for EEG and MEG.

Here are some related faqs:

2009/11/09 15:25 | ||

2012/10/22 10:55 | Lilla Magyari | |

2010/10/06 16:30 | Robert Oostenveld |

and the related example scripts:

2009/03/03 21:52 | ||

2012/08/09 20:01 | Lilla Magyari | |

2013/10/07 16:29 | Lilla Magyari | |

2009/10/29 16:22 |

and other tutorials

2017/08/18 12:38 | Simon Homölle | |

2017/10/20 09:31 | Robert Oostenveld |

2014/11/12 15:03 | ||

2011/07/06 11:47 | Lilla Magyari |

This tutorial was last tested on 14-06-2018 by Simon Homölle on OS X El Capitan 10.11.5, Matlab 2015b

^{1)}

^{2)}

^{3)}